Petsafe RF-275 Bedienungsanleitung Seite 4

pressed within
5 seconds from
the last fl ash
to change to
the next level.
After setting
the correction
level, replace
the switch cover
to protect the
switch from the
outside environment.
Testing the Receiver -
Attach the test light to the probes
according to the picture. Walk towards
the boundary wire until the test light
begins to fl ash. This will indicate the
system is functioning properly.
4
Receiver LED Function and Response
Receiver LED
Function
Correction Level 1
Correction Level 2
Correction Level 3
Correction Level 4
Correction Level 5
Low Battery
Correction
No Correction,
Beep Only
Lowest Correction
Medium Correction
Medium High
Correction
High Correction
LED Indicator
Light Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
Flashes every
4-5 seconds