Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Drawing of Unit
1. Fixing the board for wall mounting
Parallel the two nails that fix into the wall, the distance of them should keep in 140mm. Note: The size
of the nail: 3.5*25BA.
2. Universal Dock adapter connection (iPod adaptors are not included)
CONNECTING TO THE POWER
Before switching on make sure that the voltage of your electricity supply is the same as that indicated
on the rating plate.
For your own safety read the following instruction carefully before attempting to connect this unit to the
mains.
MAINS(AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power source
may damage the unit.
Caution
To prevent electric shock disconnect from the mains before removing cover, no user serviceable parts
inside. Refer servicing to qualified service personel.
Safety Precaution
Do not allow this unit to be exposed to rain or moisture.
Mains supply: AC 230V / 50Hz – AC only.
This symbol means that this unit is double insulated. An earth connection is
not required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
Read these instruction carefully before use.
AC power operation – Main switch
Select ON with the main power switch to power the unit.
Select OFF with the main power switch to switch off power.
Disconnect the power cord from the mains if the unit is not going to be used for some time.
UK-6
(1)Open the iPod dock
(2)Insert iPod
(3)Push 1st time to fix the iPod
tray
(4)Push 2nd time to release
the iPod tray
(5)Take out iPod
Werbung
Inhaltsverzeichnis
