Herunterladen Diese Seite drucken

audiowerkstatt din2midi2din v2 Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

audiowerkstatt din2midi2din v2
The audiowerkstatt din2midi2din v2 converts the synchronisation-signale known as DIN-Sync or Sync24 or Sync48 to
MIDI-clock-signals and vice versa.
Connectors:
9-12v:
Input for connecting a power supply (9-12V AC or DC (polarity doesn't matter)).
midi-in:
Input for connecting the output of the MIDI-master.
midi-out:
Output for connecting the input of the MIDI-slave.
din-in:
Input for connecting the output of the DIN-Sync -master.
din-out: O
utput for connecting the input of the DIN-Sync -slave.
Function of the buttons and LEDs:
Press the button to select the input that is used to receive the master-clock. If the din2midi -LED left of the button is on, the
"
din-in is used and the received DIN-Sync24 -clock will be used. If the midi2din -LED right of the button is on, the midi-
"
in is used and the received MIDI-clock will be used.
The clock-signal will be sent on both outputs simultaneously: As MIDI-clock at the midi-out and as DIN-Sync24 -signals at the
"
din-out .
After starting the master at the selected input, the LED flashes every
All settings will be saved and restored at startup.
If you hold the button at startup, the din2midi2din will start in DIN-Sync48 -mode. It works the same as described before, but
receiving and transmitting DIN-Sync48 -signals at din-in and din-out instead of DIN-Sync24 -signals.
In this mode the din2midi - or midi2din -LED flashes continuously.
Specifications:
Connectors:
Control elements:
Display elements:
Power:
Dimensions:
Weight:
Scope of delivery:
- audiowerkstatt din2midi2din v2
- manual (german/english)
Contact:
audiowerkstatt UG (haftungsbeschränkt)
Weserstr. 78
12059 Berlin
Germany
info@audiowerkstatt.de
http://www.audiowerkstatt.de
WEEE-Reg.-Nr. DE 49518480
"
"
"
"
midi-in (5-pol DIN)
midi-out (5-pol DIN)
din-in (5-pol DIN)
din-out (5-pol DIN)
Power (Plug 5,5mm, Pin 2,1mm)
"
clock-source-select -button
"
Status-LED din2midi
"
Status-LED midi2din
9-12V AC or DC (Polarity doesn t matter)
112 mm x 72 mm x 48 mm
280 g
"
"
¼
-note.
"
"
"
´
"
"
"
"
"
"
"
"

Werbung

loading