BC02X
Alarm clock
Quick set-up guide
For detailed information refer to
the full user manual available under
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local
service centre at:
www.braun-clocks.com
www.braun-watches.com
Battery installation
1. Insert 1xAA (1.5V) battery observing the
correct polarity, as shown on the diagram.
2. Replace battery cover.
Only use new alkaline batteries from a
reputable brand.
Time setting
Turn the time set knob (
in the direction of the arrow until the correct time is
shown.
Alarm setting
Turn the alarm set knob (
clock in the direction of the arrow until the desired
alarm time is shown.
Alarm function
To set the alarm, pull the button up via the back of
the clock so that the green alarm bar is showing. To
unset the alarm, push the button at the top of the
clock so that the green alarm bar is not showing.
Snooze function
When the alarm is sounding, press the circular
button on the upper right corner of the clock and
the SNOOZE/LIGHT feature will be activated.
The alarm will be stopped and will sound again in ~5
minutes.
+
Zzz
5 min
5 sec
Light function
Anytime, press the circular button on the upper
right corner of the clock and the SNOOZE/LIGHT
feature will be activated, illuminating the dial for ~5
seconds.
)on the back of the clock
)on the back of the