Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
The appliance do
es not shave as
well as it used to.
I replaced the
shaving heads,
but the
replacement
reminder is still
showing.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The appliance is still
attached to the wall
socket. For safety
reasons, the
appliance can only
be used without
cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the shaving
heads.
You have not reset
the replacement
reminder.
English
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery.
Press the on/off button
for 3 seconds to
deactivate the travel lock.
Clean the shaving heads
thoroughly or replace
them.
Replace the shaving
heads.
Clean the shaving heads
in the regular way or clean
them thoroughly.
To reset the replacement
reminder, press and hold
the on/off button for more
than 7 seconds.
39
Werbung
