Werbung
1.4. Connect and release
The blue dot has a marking function. Only when the slot is in
the same line as the dot, the hook can be connected and
released on/off the Spreader Bar.
1.
Hold the hook 90° to the Spreader Bar.
2.
Place the opening of the hook over the pen of the
Spreader Bar.
3.
Pull back the hook and in the same movement, turn
it back.
4.
Please, reverse these steps to release the Spreader
Bar.
Figure 1, step 1 and 2
Figure 2, step 3
10
Werbung
