Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Rechargeable ergonomic mouse for 2.4 GHz
wireless transmission and Bluetooth
Item No. 2575492
Intended use
This plug-and-play rechargeable mouse features an ergonomic design and a USB Type-
C
+USB combined receiver for use with a wide range of devices. The mouse includes 2.4 GHz
®
and Bluetooth (2.4G +4.0BT) connection modes, a 300 mAh rechargeable Li-battery and six
buttons with a click scroll wheel.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. In addition,
improper use can result in short circuits, fires or other hazards. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
USB Type-C
and USB-C
are registered trademarks of USB Implementers Forum.
®
®
Delivery content
• Mouse
• USB receiver
• USB Type-C
charging cable
®
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the
website.
Explanation of symbols
The symbol with the exclamation
mark in the triangle is used to
indicate
important
information
in these operating instructions.
Always
read
this
information
carefully.
Safety instructions
Read the operating instructions
carefully
and
especially
observe the safety information.
If you do not follow the safety
instructions and information on
proper handling in this manual,
we assume no liability for any
resulting personal injury or
damage to property. Such cases
will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the
reach of children and pets.
• Do not leave the packaging material lying
around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme tem-
peratures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases,
steam, and solvents.
• Do not place the product under any me-
chanical stress.
• If it is no longer possible to operate the
product safely, take it out of operation and
protect it from any accidental use. Safe
operation can no longer be guaranteed if
the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in
poor ambient conditions, or
- Has been subjected to any serious
transport-related stress.
• Please handle the product carefully. Jolts,
impacts, or a fall, even from a low height,
can cause damage to the product.
• Consult an expert when in doubt about the
operation, safety, or connection of the ap-
pliance.
• Maintenance, modifications, and repairs
must only be completed by a technician or
an authorised repair centre.
• If you have questions that remain unan-
swered by these operating instructions,
contact our technical support service or
other technical personnel.
b) LiPo battery
• The rechargeable battery is permanently
built into the product and cannot be re-
placed.
• Never damage the rechargeable battery.
Damaging the casing of the rechargeable
battery might cause an explosion or a fire!
Unlike conventional batteries/recharge-
able batteries (e.g. AA or AAA type), the
casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather
a sensitive plastic film only.
• Never short-circuit the contacts of the
rechargeable battery. Do not throw the
battery or the product into fire. There is a
danger of fire and explosion!
• Charge the rechargeable battery regularly,
even if you do are not using the product.
Due to the rechargeable battery technol-
ogy being used, you do not need to dis-
charge the rechargeable battery first.
• Never charge the rechargeable battery of
the product unattended.
• When charging, place the product on a
surface that is not heat-sensitive. It is nor-
mal that a certain amount of heat is gener-
ated during charging.
Operating elements
1
2
3
4
5
9
6
7
8
13
14
1 Left button
2 Right button
3 Scroll wheel
4 DPI button
5 Mode switch button
6 USB indicator
7 BT1 indicator
8 BT2 indicator
Operation
a) Switching modes
Press the Mode Switch button (5) to toggle between the BT1, BT2 and the Type-C
connection modes.
BT1 Device Connected
USB & Type-C
®
Receiver
Connected
b) 2.4G USB connection
1 Slide the Power Switch (11) to ON.
10
11
12
15
9 Charging indicator
10 Type-C
charging port
®
11 Power switch
12 USB slot
13 USB receiver
14 Forwards
15 Back
BT2 Device
Connected
2 Remove the USB receiver from the USB
slot (12).
+USB
®
Werbung
