Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
GB Installation and operating instructions
LED under cabinet lights
Art. No. 28592-28597
Many thanks for deciding to buy our LED under cabinet light.
Our lights are made out of sturdy, high value materials and will provide you with attractive lighting. This
is guaranteed by an attractive appearance and a high degree of resistance to corrosion. The under
cabinet light is suitable for mounting on normal, flame-proofed surfaces. Only for use in inside rooms.
Please read through installation and operation instructions carefully and keep these in a safe
place for future reference.
We do not accept liability for damage to persons or property caused by non-observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1 under cabinet light with LED illuminant, LED class 1, cannot be exchanged
1 Plastic connector
1 connection line
1 set of fastening clips with screws
Installation and operating instructions
Technical data:
Article
Connection
28592
DC 24V, 3W
28593
DC 24V, 5W
28594
DC 24V, 11W
28595
DC 24V, 3W
28596
DC 24V, 5W
28597
DC 24V, 11W
Safety and warning notes:
Make sure, before using the light that it has not been damaged during transportation. The light
may not be operated if the cable or the electrical parts are damaged.
Never make your own repairs to faulty parts. Repairs must be done by a trained electrical
specialist
Do not leave children unattended in the area of the lights or other electrical appliances.
Keep packaging materials well away from children and pets. Danger of suffocation!
Be careful. The packaging contains small parts which can be swallowed by small children.
The entire product may neither be changed nor converted. Changes made to the lights lead to
annulment of the guarantee (warranty).
Care and servicing:
You must make sure that the power supply is disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals, inflammable cleaners or abrasives for cleaning. These can damage the
surface coating and / or the insulations of the light.
Disposal:
Used electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Installation instructions Art no. 28592-28597
Length
Width
Height
In mm
In mm
In mm
300
33
8
500
33
8
1000
33
8
300
24
24
500
24
24
1000
24
24
Page 1 of 2
Number
Protection
of
degree
LEDs
42
IP 20
72
IP 20
144
IP 20
42
IP 20
72
IP 20
144
IP 20
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Protection
Max.
Class
Number of
III
6 pces.
III
4 pces.
III
2 pces.
III
6 pces.
III
4 pces.
III
2 pces.
®
Status 10.2009
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Heitronic 28592

  • Seite 5: Verpackungsinhalt

    Oberflächenbeschichtung und(oder die Isolierungen der Leuchte beschädigen. Entsorgung:  Elektronik-Altgeräte müssen den öffentlichen Sammelstellen zugeführt werden und dürfen nicht als Hausmüll entsorgt werden. ® Heitronic H. Vollmer GmbH Allmendring 29 D-75203 Königsbach-Stein Installationsanweisung Art. Nr. 28592-28597 Seite 1 von 2 Stand 10.2009...
  • Seite 6 Kabel und Stecker frei von Zug- und Drehkräften sind. Kabel nicht knicken.  Nach Beendigung der Montagearbeiten erfolgt die Verbindung mit dem Stromnetz.  Das Typenschild darf nicht entfernt werden. ® Heitronic H. Vollmer GmbH Allmendring 29 D-75203 Königsbach-Stein Installationsanweisung Art. Nr. 28592-28597 Seite 2 von 2 Stand 10.2009...

Diese Anleitung auch für:

2859328594285952859628597

Inhaltsverzeichnis