Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CFD804
15.2.4 Intensity (1)
• Type
• Function
15.2.5 LED indicator (3)
• Name
• Description
15.3
Operation of monitor
15.3.1 Power button and Power supply
As soon as the monitor is connected to supply voltage it will be turned on. Usually, it's
not necessary to push the power button. The operating voltage range is from 14,5 VDC
to 20 VDC.
15.3.2 OSD-Menu
The On-Screen-Display (OSD) allows an end-user to adjust screen performance of the
monitor directly though an on-screen instruction window. The user interface provides
user-friendliness and ease-of-use when operating the monitor.
The monitor is factory-adjusted in this way, that all required timings are displayed as
best as possible. Nevertheless, it could be necessary to adjust some parameters. For
that purpose use the button "Menu" to start the OSD and follow the illustrations. If
buttons remain untouched for seconds while displaying a menu, the firmware shall save
the current adjustments and exit.
After pushing the "Menu" button the following screen appears:
Figure below shows the Main-Menu bars on the left side and the Sub-Menu of "Picture"
on the right side. Each Sub-Menu can be selected by button "Menu". To select
Potentiometer
Gray scale level adjustment
"Status"
Off
Power Off
Green
Normal operation
Orange
No Signal
15 Operating Instructions
8
Werbung
