Default Setting Of The Minicontrol 2 - Meditech MiNicontrol 2 Bedienungsanleitung

Default Setting of the minicontrol 2

The minicontrol 2 will always select the following values for their parameters when the
power is turned on.
*Transmit MIDI Channel no. 1.
*Default Octave will be from C2 (36) to C4 (62)
*Default After Touch value will be 0
*Default Velocity value will be 0
*Default Reverb Depth value will be 64
*Default Pan Pot value will be 64
*Default Volume value will be 127
*Default CC Data value will be 0
*Default CC no. value will be 0
*Default Control Change (CC-00=0, CC-32=0) message will be
*Default Program Change (PG=1) message will be transmitted.
*Real-time Controller 1 - 8 on Midicontroller 10 - 18 each
on Channel 1
minicontrol 2
minicontrol 2 minicontrol 2
transmitted.