Clas Ohlson Morphea LED Kurzanleitung

Morphea LED Desk Lamp
Art.no 18-1075, 18-1349, 36-3347, 36-6360
Please read the entire instruction manual before use and save it for future reference. We reserve the right for any errors
in text or images and for making any necessary technical changes to this document. If you should have any questions
concerning technical problems please contact our Customer Services.
Safety
• The product should not be taken apart or modified.
• Do not place the product where it could fall into water or other type of liquid.
• The desk lamp is only intended for indoor use. Do not expose the product to moisture.
• The mains lead should be checked regularly. Never use the product if the mains lead or plug is damaged.
• The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
• Make sure the lead cannot be pinched or damaged when the lamp is used. Position the lead in such a way that no
one can trip over it.
• Use only those accessories approved by the manufacturer.
A B
Assembly
For ease of transportation, the lamp comes partially disassembled. Assemble the lamp before use:
1. Do not plug the lamp in until it has been completely assembled.
2. Assembly can be done in two different ways:
a) By using the included attachment and screwing it onto e.g. a table top according to the figure.
b) By screwing the included angle bracket onto a wall or other suitable location according to the figures.
3. Connect the DC plug to the transformer according to the figure. Then connect the plug to the wall socket.
Care
Remove the plug from the wall socket and let the lamp cool off before cleaning it. If necessary clean the lamp with a soft cloth.
Never use abrasive cleaning solutions or solvents.
Responsible disposal
This symbol indicates that this product should not be disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed
of in a responsible manner. When recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.
Specifications
Power supply
Input Power 220–240 V ~ 50/60 Hz
Output Power 12 VDC, max. 250 mA, 3 W or 8.5 VDC, max 350 mA, 3 W
Type of bulb LED 1.2 W, 70 lm
GREAT BRITAIN • CUSTOMER SERVICE
tel 020 8247 9300 internet www.clasohlson.co.uk e-mail customerservice@clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Model Morphea LED
B