Charging - Wilfa Innobot Auto-Empty Station Anleitung

protective fences (such as duplex floors, open
balconies and furniture tops).
• Do not use it in an environment where the
temperature is higher than 35°C lower than 0°C
or there are any liquids and sticky objects on the
ground.
• Before use, please arrange and fold the wires on
the floor in case of any obstruction that blocks the
machine movement.
• Do not let the machine absorb hard objects or
sharp objects (such as decoration waste, glass
and nails, etc.).
• Please clean and maintain the appliance and base
in power-off state.
• If products need to be transported, please make
sure that the machine is turned off, and it is
recommended to use the original packaging box
for packaging protection.

CHARGING

• Do not use any third-party battery, power cord or
base.
• Do not disassemble, repair or modify the battery
or base without permission.
INNOBOT · RVCD-D17
7
EN