pixima fontanot MINI TUBE Montageanleitung Seite 7

using article C64 and glue X01 (fig. 1).
18. Insert the bars A39 in the parts D39-D40 previously assembled on the balusters C67 (fig. 1A)
and if necessary cut them based on the staircase configuration. Join the bars A39 to each other
using the part A41 and the glue provided. Finally, tighten the parts C76 (fig. 1A).
Final Assembly
19. Check the verticality of the entire staircase and - if necessary - correct by moving support N16
(fig. 1).
20. Dismantle the first tread (L40) and drill the floor using a Ø 14 mm point in the same place as the
openings found on support N16 (fig. 1).
21. Insert elements C39 and secure in a permanent manner (fig. 1).
22. Remount the first tread (L40).
23. Insert articles C74 into balusters C67 to complete staircase assembly (fig. 1).
After you have finished assembling the staircase,
please visit our website and send us your suggestions: www.pixima.it
7 - MINI TUBE