ecofort ecoQ CleanVac Pro Gebrauchsanweisung Seite 71

Charging:
When the power indicator shows only 5% power left, it indicates that the power of
the unit is low and it needs to be charged. When charging, hang the unit onto the
wall mount, connect the charger to a power outlet and the unit; the light ring and the
digital display of battery level will flash, indicating it is charging.
Tips: There are two ways to use the wall mount:
1. Fix the wall mount on the wall with an expansion bolt to hang the vacuum
cleaner.
2. 4 pieces of 3M glue are included in the product. Attach them to the designated
place on the back of the wall mount. The position of the wall mount on the wall
should be as high as that of the vacuum cleaner to aid the vertical placement
of the vacuum cleaner (do not install the wall mount on a height where the unit
hangs freely!).
• Charge Level Display flashing indicates battery
is charging
• Charge Level Display steady showing 100%
indicates battery is fully charged
• Light Ring flashing red 8 times and shut down
indicates low-voltage
• Light Ring flashing red and Stuck Fan indicator
is on, indicates the fan is blocked
• Stuck Floor Brush indicator flashing rapidly
indicates the floor brush is blocked
Charge Level
Display
Charging
Socket
Note: The floor brush also
functions as an independent
holder for upright storage.
The wall mount is therefore
not a necessity but rather a
convenience option.
ecoQ CleanVac Pro User Manual | 71