Messages / Audible Signals; Side Arms And Two Heating Elements In Wrong Position; Appliance In Wrong Position In Relation To Customer / Moving Out Of Appliance - Wella Professionals Climazon2 Gebrauchsanweisung

6 Performing treatment
Figure 10
64

6.5 Messages / Audible signals

The appliance shows you possible errors in the display f.
➥ In addition, the pilot lamps c flash and a tune is played to let you know.

6.5.1 Side arms and two heating elements in wrong position

➥ The display f shows the correct way to position the side arms or the two
heating elements 1 in an animated image.
• Follow the instructions in the display f.
• After correcting the position:
➥ The appliance begins the selected treatment.
Recommended position of the side arms in the treatment programme <Drying>:
The side arms can be positioned anywhere in the treatment programme <Drying>.
However, both side arms must be positioned alike – either "out" or "in".
• We recommend you fold in the appliance side arms for efficient drying.
➥ The appliance shows this recommendation visually by illustrating the optimal
way to position the side arms in an animated image.
• It is only necessary to fold out the side arms if you have put in very large cur-
lers on the side of the customer's head.
6.5.2 Appliance in wrong position in relation to customer / Moving out
of appliance
➥ The text <Please check the client's position> appears in the display f
1. Check the position of the appliance as described in "section 6.2" page 62.
• After correcting the position:
2. Press functional button d next to <Start>.
➥ The appliance resumes the stopped treatment.
6.5.3 Other error messages
See "section 9" page 76.