Navitel R285 2K Benutzerhandbuch Seite 19

Installation of the DVR
1. Put the microSD card into the DVR. Use a high-speed SD card (ClassU3 or above); capacity should
be within 8-256 GB.
• To avoid malfunctions of the DVR and/or SD-card, don't insert and remove SD-card
during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. To
format the SD-card in Menu select Format SD-card and confirm it.
2. Stick the electrostatic film on the windshield and fix the DVR over it with the mount.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the DVR power port (USB-C).
5. Adjust the camera position.
6. Turn the power on, check whether the device is installed correctly. If the device is installed correctly,
the indicator will glow.
NAVITEL R285 2K | 19
М
ОК
EN