FLYLINKTECH CF400 Bedienungsanleitung Seite 9

Start the Vehicle
Notice:
1. To extend the service life of jump starter, make sure the car jump starter
at least 50% maintained capacity before being used.
2. Please make sure that you plug the clamps into car jump starter
completely.
3. Please do not connect the red and black clamps together to prevent short
circuit
4. Please remove the clamps from both the car battery and jump starter in 30s
after starting the vehicle successfully.
Step1:
Press the on/off button to check the maintained power of the car jump starter,
and make sure that 2 indicator lights light up.
Step2:
Connect the EC5 plug into the car jump starter port completely,the red and
green light on the EC5 clamps flash alternately, which means it is ready to work.
EN
7