Product Maintenance - Create VITRO HANDY STUDIO Bedienungsanleitung

Before use
• Main power supply socket: use government approved safety products.
• Check the socket regularly to prevent any damage.
• Repairs should be done by qualified technicians only. Do not open the cover on your own.
• Check the power cord and plug for any damage, if found please do not use.
• Do not use any extension power cord, use the main power supply socket point only. This
machine needs high power current.
• In case the machine is not in use for a long period of time: first, switch on the machine
and allow 10 minutes for the electronic component to stabilize. Second, after 10 minutes
of warm-up, start to operate. Do not pull out the plug with wet hands.
• Do not use the machine near water, fire or in a damp area. This machine is for indoor use,
it has not been designed for outdoor use.
During use
• Place the machine on a flat, lever and solid surface.
• Keep the machine out of reach for children. The machine can be very hot on the induction
area.
• Do not place the below objects on the top plate when the machine is working as they
generate heat: stainless steel; iron; cast iron; aluminium foil; lid and enamel; knives, forks
and spoons; plates made of iron, stainless steel, cast iron and aluminium; empty pots and
pans.
• While the machine is working with pots or pans on top, do not carry or move the machine.
• Allow good surrounding ventilation for the machine. This can avoid overheating problems.
• Do not drop metal objects into the machine from the ventilation gap.
• How to take care of the top plate?
• Do not drop heavy objects on the plate;
• Do not pour water, acid and liquid on the plate;
• Do not burn anything with fire on the plate;
• Do not place hot pots or pans on top, when the machine is not in use.
• In case you find any crack on the plate, cut the power off and do not use it. Send the ma-
chine for repair.
• Some pots may produce noises during usage. Move the pot slightly as the noise can dis-
appear or be reduced. If the noise still remains, change the pot.
• Do not place the machine on top of a carpet, cloth or paper materials, when the machine
is working. This will help prevent fires.
Warning: Do not touch the top plate after used. The induction cooker is still burning hot,
even if the power has just been switched off.
• Do not unplug by pulling the AC cable.
• Switch off the main power before pulling the plug out.
• Keep the pans or pots away from the machine after use.

PRODUCT MAINTENANCE

E NGLI SH
9