Troubleshooting - Create VITRO HANDY STUDIO Bedienungsanleitung

PROBLEM
No beeping noise is heard when
inserting the plug, with nothing
shown on the digital display.
The cooker stopped heating sud-
denly, no output power.
The cooker is not heating. E1 on
display.
The cooker stopped heating sud-
denly. E2 on digital display.
The cooker stopped heating sud-
denly and now it heats intermit-
tently.
The cooker stopped and beeped
suddenly. E3 on digital display.
The cooker stopped and beeped
suddenly. E4 on digital screen.
The cooker stopped after beeping.
E5 on digital display.
The cooker stopped and beeped
suddenly. E6 on digital display.
The cooker stopped and beeped
suddenly. E0 on digital display.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
10

TROUBLESHOOTING

• Is the plug properly connected?
• Is your auto switch off fuse broken?
• Is the power off?
• Is the ambient temperature too high?
• Is the air inlet or outlet blocked?
• Maybe, the internal temperature is too high. Restart the cooker
a few minutes later.
You need to put a pot or pan on the crystal board. The cooker
won't heat if there is nothing on it.
• E2 indicates that the temperature sensor in the cooling fin is
damaged.
• If after a few minutes E2 is still on display, it must be sent to
the repair service.
When low power chosen and for some functions this is a normal
behaviour.
Municipal voltage supply is higher than 275V.
Municipal voltage supply is lower than 100V.
• E5 indicates that the temperature sensor in the centre of the coil
is damaged.
• If after a few minutes E5 is still on display, it must be sent to
the repair service.
• Is a wrong function key pressed (e.g., stir fry under braise
function)?
• No water in the cooking utensil when making braise, or soup,
for example.
• Too thick soup content or insufficient water.
• The cooker is heating an empty pot or pan.
• Internal abnormality.
• If after a few minutes E0 is still on display, it must be sent to
the repair service.
SOLUTION