Safety Information; Product Description - Kruger & Matz KM0671 Bedienungsanleitung

SAFETY INFORMATION

Before use read the contents of this manual carefully and
keep it for future reference.
• Before connecting headphones to the device, turn down the
volume to avoid hearing damage. Do not use headphones at
the highest volume level for long periods of time.
• Do not use headphones in places where the inability to
hear ambient sounds poses a serious danger (especially
at pedestrian crossings, railroad crossings, etc.). It is
forbidden to use headphones while driving a car,
motorcycle, bicycle or other motor vehicles. This can
have a negative impact on user safety.
• Stop using the
experience tinnitus, discomfort or other side reactions.
• It is forbidden to repair the equipment on your own. In
case of damage, contact an authorized service center for
repair. If the device is damaged, do not use it.
• The headphones should be protected from strong
shocks and falls.
• Clean the headphones with a soft, slightly damp cloth,
without using acidic agents.
• Protect the headphones from moisture, water and other
liquids. Do not use or store headphones in extreme
temperatures. Protect the headphones from direct sunlight.
• Operating time and Bluetooth range may vary from the
stated values, depending on environmental factors.
• Not all phones and external devices support all the
features listed here. Support for specific features
depends on the manufacturer, type of device and/or
EN
operating system.
• The sound quality of the playback may be affected by the
sound settings of the external device..
8
Owner's manual
headphones immediately
Owner's manual

PRODUCT DESCRIPTION

1. Button +
2. Play button
3. Button -
4. LED indicator
5. Power button
6. USB-C socket
7. 3.5mm jack
8. Microphone
if you
OPERATION
Turning on and off
Press and hold the power button to power the headphones
on or off.
Pairing with Bluetooth devices
1. To activate the pairing mode:
• If the headphones are turned off: press and hold the power
button for 5 seconds until "Pairing" message is played.
2. Turn on Bluetooth on an external device (for ex. a phone).
3. Search for Bluetooth devices nearby. Connect to the
1
2
3
4 6
5 7
8
EN
9