Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AXIS M3011 Installation Guide
AXIS IP Utility - single camera/ small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also
manually set a static IP address through this application. AXIS IP Utility is available on the Axis
Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS M3011 Network Camera on the same network segment
(physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS M3011 Network Camera is connected to the network and that power has
been applied.
2. Start AXIS IP Utility.
3. When AXIS M3011 appears in the window, double-click to open the camera's home page.
4. See page 9 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your computer is connected to.
2. Click the button
and IP address for the AXIS M3011 Network Camera. The serial number is located on the
product label.
3. Click the Assign button and follow instructions.
4. Click the Display device home page button to access the AXIS M3011 Network Camera web
pages.
5. See page 9 for instructions on how to set the password.
Assign new IP address to selected device - and enter the serial number
Page 7
Werbung
