Werbung
Installing and Using the Product
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner' s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Function LED / Remote Control Receiver
C Rear Speakers / Wireless Receiver
a Connect the sound bar to your TV via an optical cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ wireless receiver [ sound bar. Then, turn on the sound bar. When
the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and the wireless receiver will
light up green.
d Using the product with your TV
A Press the F button repeatedly until the OPTICAL LED
B On your TV' s settings, set the output speaker to [Optical] or [External Speaker].
e Connecting the product to your smartphone via Bluetooth
A Tap the Settings
On)
B Press the F button repeatedly until the blinking Bluetooth LED
C Find and select the sound bar on your smartphone. The product should appear as "LG SQC4R(XX)" .
D When the product is connected to your smartphone via Bluetooth, the Bluetooth LED
If you see a red LED on the wireless subwoofer or on the front of the wireless receiver, it means that the sound bar is not connected to
the speakers. If this is the case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the Pairing (PAIRING) button on the back of the wireless subwoofer or wireless receiver. Check if LED blinks green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer or on the front of the wireless receiver light up.
Keep the sound bar, the subwoofer and wireless receiver away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent
wireless interference.
y Some speaker may not playback audio due to the input source. Select BASS BLAST sound mode to listen through all speakers.
y Actual features, functionality, and other product specifications may differ and are subject to change without notice.
SQC4R.DEUSLLK_SIMPLE_MFL72022870.indd 3
button on your smartphone and select
D Wireless Subwoofer - Install it close to the sound bar.
E External Device - (Blu-ray player, game console, etc.)
appears on the function LED.
Bluetooth. Turn on the Bluetooth function. (
appears on the function LED.
Off >
turns on.
2023-08-24
9:30:53
Werbung
