Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Directions for use
We thank you very much for choosing our
GB
product. It has been produced, tested and
packed with care and in accordance with the
currently applicable European regulations.
Please unpack the contents carefully. Check
immediately upon receipt that all parts
included in the scope of delivery are present
and that no damage has been caused
during transport. Should there be cause for
complaint, please contact your specialist
retailer.
Important notes:
• Please read these instructions carefully
before assembly and commissioning. They
will provide you with important information
with regard to the use of the product.
Please also follow the supplementary
assembly instructions, if required. Keep
these instructions in a safe place for your
information or for ordering spare parts.
• This product is not a toy and so, it is not
suitable for handling by children.
• If the product is delivered with a plug-in
power supply unit, it may only be operated
with this plug-in power supply unit.
• The supplied fittings, in the case of wall
and ceiling luminaires, are designed for
installation on a concrete ceiling or on
plastered brickwork. If you have a different
sub-surface for installation, please adapt
the fittings so as to be suitable for that
surface.
• In the case that you have purchased a
product that can be operated by a radio
control system (e.g. by wireless remote
control or an app), this product complies
with the basic requirements of the
Directive 2014/53/EU (Radio Equipment
Directive) of the European Parliament and
the Council of the European Union (of
16.04.2014 regarding radio equipment and
the mutual recognition of their conformity).
The complete Declaration of Conformity is
11
available on the internet at the following
address:
https://scm.paul-neuhaus.de/public/conformity/
Warning information:
• We, as the manufacturer, cannot be
made liable for damage that is a result of
improper installation or unintended use.
• The national and international electrical
safety instructions must be followed for
both the installation and operation.
• The electrical connection may only be made
by carried out by an authorised specialist.
• It is essential that the product is
de-energised during installation.
• Please ensure that the wires are not
damaged during installation.
• Use only the prescribed and permitted
lamps.
• Never touch halogen lamps with bare hands
(use, for example, a lint-free and
oil-free piece of cloth).
• The minimum distance to the surfaces
that are illuminated must be maintained,
without fail (see the sticker on the lamp).
• When carrying out maintenance and
changing the lamp, it is essential that it has
cooled down and is de-energised.
Explanation of symbols:
Do not touch the LED!
Protection class 1: This
luminaire is fitted with a
protective conductor. This must
be connected to the protective conductor
terminal.
Protection class II: This
luminaire has been specially
insulated and may not be
connected to a protective conductor.
Werbung
