plottiX ixpress Mini 2 Bedienungsanleitung Seite 6

Operating Instructions
1
2
3
6
Place the press on the heat resistant tray.
Insert the power plug into the socket.
Make sure that the mains voltage of the socket corre-
sponds to the specified voltage of the iXpress Mini 2.
Note:
Unplug the device from the power outlet when not in use.
Press the ON/OFF Power Button to switch on the press. A
signal tone sounds and the symbols of the ON/OFF Power
Button and the Temp-Button start to light up red. The
digital display now shows the current temperature of the
press surface.