CMP VE6073 Bedienungsanleitung Seite 5

ON/OFF Button
2) Starting up the device
Connect the cable supplied to the port located on the back of the product. Next connect the
USB plug on the cable to a USB port on a computer or suitable power outlet.
Next press the ON / OFF button to start the diffuser function. Press the same ON/OFF button
several times in a row to choose a lighting colour and to switch off the product.
Warnings for use:
Do not use any other cable except the one supplied with the device.
Take care not to open, modify or take apart the product. Taking the product apart may cause an
electrical or fire risk. In the event of product malfunction, consult a specialist technician. Do not allow
this product to be in contact with combustible materials or high levels of heat. Do not dispose of in fire
or flames.
Elevated rates of humidity may contribute to the development of biological organisms in the area.
The area around the humidifier should not be wet or damp. In the event of dampness, reduce the
humidifier output. Where it is not possible to adjust the humidifier output, only use the humidifier
intermittently. Do not let absorbent materials such as rugs, curtains, wall coverings or tablecloths get
damp.
Unplug the device when filling or cleaning the tank.
Micro-organisms that may be present in the water or in the environment in which the device is used or
stored can develop in the water tank and can be diffused into the air, leading to very serious health
risks if the water is not replaced and if the tank is not correctly cleaned every 3 days.
Cleaning and care:
Empty the reservoir and refill it again every three days. Before refilling, rinse the reservoir with tap
water or clean it with cleaning products as per the manufacturer's recommendations. Remove all lime
Filter holder