Intended Purpose; Technical Data - Powerfix Profi 4417154 Gebrauchsanleitung

4417154-Fliesensch-man 15.02.13 07:27 Seite 2
TILE CUTTER
GB
WARNING! In order to reduce
the risk of injury, please read
these instructions carefully
prior to using for the first time and
store with the tool afterwards! When
passing the tool onto another user,
ensure that these instructions are also
passed on.
b Use in accordance with the

intended purpose

The tile cutter number 4417154 is suitable for
accurate cutting and breaking of ceramic tiles
as well as for diagonal and angled cuts up
to 45°.
b Technical data
max.
400 mm
0°
45° 45°
Dimensions:
Approximately 645 x 210 x 130mm
Plate thickness: Up to approximately 12mm
Cutting length: Up to approximately 400mm
Carbide cutting wheel: Ø 22 x 6 x 2mm
Weight: Approximately 4kg
We reserve the right to make technical
changes.
max.
12 mm
INCL.
6
mm
22
mm HM
2
ADW is a registered trademark of Abraham
Diederichs GmbH, D-42349 Wuppertal
Please keep the contact address.
b Safety, care and disposal
notes
Place the tile cutter on an even, stable
surface to use.
Ensure that the screw connections are firmly
tightened.
Pay attention to ensure good motion of the
cutting and breaking mechanism (3) on the
guide rails (4).
Wear protective gloves!
Wear non-slip shoes!
Wear safety goggles!
Wear a dust protection mask!
After use, remove dirt and dust from the tile
cutter with a damp cloth. Wipe down the
guide rails with an oily cloth.
Store the tile cutter in a dry place away from
children.
Defective tile cutters that can no longer be
used must be disposed of in accordance with
the local regulations.