Polytron FSA 16 A Bedienungsanleitung

General
The products of POLYTRON convince by their uncompromising
quality, the simple and fast installation with intuitive operation and
their technical features. POLYTRON takes sustainability into
account with its environmentally friendly product and packaging
design focused on the consistent reduction of unnecessary
packaging materials and package and enclosed documents.
The mounting and safety instructions can be found in the attached
sheet!
Description
The active SAT splitter FSA 16 A is used to split an input signal up
to 16 outputs. The FSA 2-8 A is used to split two input signals to 8
output signals each. Both splitters work in the frequency range
950...2150 MHz. The fed-in SAT signals are available loss-free at
16 outputs, the attenuation is compensated for. The possibility of
the LNB voltage supply is provided by a switchable voltage of 15
V .
DC
Installation instructions
Firstly, please read the safety instructions!
Install the SAT splitters in a well ventilated room (ambient
temperature max. 50 °C). The active SAT splitters are prepared for
installation in a 19" rack. Install the FSA splitters so that the SAT IF
input and output connectors are easily accessible. From top,
bottom and front, the device must have at least 15 cm clearance.
The ventilation openings may not be covered. A POLYTRON
mounting bracket is available for wall mounting (part no. 5552185).
Disconnect the power plug for installation or work on the wiring.
The device must be grounded according to EN 60728-11.
Technische Daten / Technical data
Typ/ Type FSA 16 A
Artikel-Nr./ Article no. 7520400
Eingang/ Input
Anzahl/ Number
Konnektoren/ Connectors F-Buchse / F female
Impedanz/ Impedance
Frequenzbereich/
Frequency range
Eingangspegel/ Input level
Rückflussdämpfung/
Return loss
Ausgänge/ Outputs
Anzahl/ Number 16
Konnektoren/ Connectors F-Buchse / F female
Impedanz/ Impedance
Frequenzbereich/
Frequency range
Verstärkung/ Gain
Ausgangspegel/ Output level
Ausgänge DC geblockt /
Outputs DC blocked
Rückflussdämpfung/
min. 11 dB (all ports)
Return loss
LNB Spannungsversorgung/
15 V (on/off switchable)
LNB supply voltage
LNB Stromaufnahme/
LNB supply current
Betriebsparameter/ Operating parameters
Betriebsspannung/
85 ... 265 VAC, 50/60 Hz
Power supply
Leistungsaufnahme/
4 W / 9VA plus LNB power
Power consumption
Temperaturbereich/
Temperature range
Maße (BxHxT)/ 483 x 44 x 240 mm
(19" 1 HE / 19" 1 RU)
Dimensions (WxHxD)
Gewicht / Weight 3.1 kg
FSA 2-8 A
Aktive SAT-Verteiler
7520410
1 2
75 Ohm
950 ... 2150 MHz
FSA 16 A / FSA 2-8 A
max. 85 dBµV
(@ IMR 35 dB)
min. 11 dB
2x 8
75 Ohm
950 ... 2150 MHz
0 ±2.5 dB
-65 ... -25 dBm
Ja /Yes
max. 250 mA
0 ... 50 °C
3.2 kg
MADE IN GERMANY
0901684
Active SAT splitters
Bedienungsanleitung
User manual
V6