audeeo AO-ANCHP1 Bedienungsanleitung Seite 3

EN
Operation Instructions
Connect the Type-C cable (only use the provided cable) to a computer USB port or a USB
1
wall charger. Plug the other end of the Type-C cable into the Type-C charging port (5)
located on the bottom of the headphones. Once the headphones are fully charged (2.5hrs)
Bluetooth Pairing: Ensure the headphones are turned off, then press the MULTI-FUNCTION
2
BUTTON (2) for 5 seconds to turn the headphones ON. The headphones will enter Bluetooth
pairing mode automatically and the LED INDICATOR LIGHT (4) will flash BLUE and RED.
Ensure Bluetooth is enabled on your smartphone, tablet , or music device. Your device will
start searching for wireless devices. The headphones will appear as "audeeo ANC
Headphones" in the list of available Bluetooth devices. Select "audeeo ANC Headphones" and
connect. The headphones will emit a tone to indicate that it has been successfully paired
with your device.
1
2 2
BLUETOOTH
audeeo ANC Headphones
BLUETOOTH
audeeo ANC Headphones
Connect an AUX cable to the AUX-In jack (on bottom of the headphones) and plug the other
3
end into your music device.