Gastronoma 18310015 Bedienungsanleitung Seite 28

DISPLAY
Tare weight
Zero weight
Negative value
Weight/water/milk
PREPARATION
Remove the battery cover underneath the
appliance. Insert 2 x 1.5 V AAA batteries.
Check that the batteries are in the right
way round. Replace the battery cover.
MODE AND UNIT
When the appliance comes on, the
measurement unit is always grams and
ml.
Short press the UNIT button to change
between the following measurement
functions: weight - water volume - milk
volume - weight.
Weight Water
Long press the UNIT button one or more
times to change between the following
measurement unit pairs: g (grams) and ml
(millilitres) or lb:oz (pounds:ounces) and
fl.oz (fluid ounces).
g og ml
UK
WEIGHING
1. Place the appliance on a flat, stable
surface.
2. Press the ON/ZERO button. All the
segments light up on the display.
When the display shows "0", it is
ready for use.
3. Place a bowl (if used) on the weighing
platform and press ON/ZERO button
to reset the weight reading to 0.
4. Change unit if necessary.
5. Put weighing object on the weighing
platform or in the bowl on to start
weighing. The display will show the
reading.
Milk
lb:oz og fl.oz
28
Unit: g
Unit: ml
Unit: fl.oz
Unit: lb:oz
Load weighing object