Grundig Rio 49 CLX 7745 AP Kurzanleitung Seite 147

PICTURE /SOUND SETTINGS
Sound settings
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select menu item »Sound« with »
and press »
V
– »Sound« menu is active.
Settings > Sound
Picture Sound
Sound Mode
Night Mode
Bluetooth
Select Bluetooth Device
Advanced
Restore Default Sound Settings
Change Area
Note:
Additional operations are explained in the
7
following sections.
Sound Mode
1 Select the line »Sound Mode« with »
» «.
Λ
<
2 Press » « or »
option.
DTS Premium Sound™
DTS Premium Sound is an advanced surround
sound solution suite that accurately extracts and
places audio cues for an immersive surround
experience over the TVs built-in speakers. To
complete the audio experience, post processing
and psychoacoustic techniques are implemented
to provide 3D audio rendering to match video
content, for bass and dialog enhancement and
to deliver consistent and level volume across
content.
DTS Premium Sound Technology is supported in
Film, Natural, Speech and Music settings.
1 Select the line »Sound Mode« with »
» «.
Λ
2 Select the option »Movie«, »Natural«,
»Speech« or »Music« with »
30 / 119 TR
«, »
V
<
« or »
« to confirm.
Tuesday
xx xxx xxxx
Source TV Network Timer Parental
User
Off
Off
- - - -
Back
BACK
V
>
« to select the desired
V
< >
« or »
-----------------------------------------------------------
Night Mode
Night Mode prevents sound fluctuations and
volume increases.
«,
Λ
1 Select the line »Advanced« from the Sound
menu with »
>
«
confirm.
2 Select the line »Night Mode« with »
» «.
Λ
3 Activate (»On«) or deactivate the night
mode by pressing »
Notes:
»Night Mode« appears in menu if »DTS«
7
has been selected in »Sound Mode«.
Other settings are available under
7
»Advanced«. Select the line »Advanced«
with »
V
Exit
EXIT
confirm.
Switching bluetooth on / off and regis-
tering an external BT device
Bluetooth enables the television's audio signal
wireless to be sent to a registered BT device
« or
(e.g. subwoofer).
The signal transmission is possible from the
television set to a Bluetooth-enabled device,
only.
1 Switch on the appropriate subwoofer and
start the registration on the subwoofer (see
subwoofer operating manual).
2 Select the line »Bluetooth« with »
» « and switch on with »
Λ
– The subwoofer is being searched for. After
a short time the subwoofer is displayed in
the menu.
3 When the subwoofer has been found
confirm with »OK« .
– The name of the subwoofer is displayed in
« or
For DTS patents, see http://patents.dts.com. Manufa-
ctured under license from DTS Licensing Limited. DTS,
the Symbol, DTS and the Symbol together, and DTS Pre-
«.
mium Sound are registered trademarks or trademarks of
DTS, Inc. in the United States and/or other countries. ©
DTS, Inc. All Rights Reserved.
« or » « and press »OK« to
V Λ
< >
« or » «.
« or » « and press »OK« to
Λ
<
« or »
Television / User Manual
« or
V
« or
V
>
« (»On«).