Function And Operation - Meteor C20 Benutzerhandbuch

8. FUNCTION AND OPERATION

• Power Supply: connect to DC 12V/24V or AC 100-240V power (using dedicated adapter).
• Display Screen Initialization: connect to the power supply, the buzzer will make a long beep, and the display will be
on for 2 seconds then enter the normal operating mode.
• Power On/Off: press
• Temperature Setting: press + or - for temperature setting, the setting will be saved automatically after stopping
operating for 3 seconds. (Note: the temperature displayed is the current temperature of the compartment, it' II take
a while to reach the set temperature.) Temperature setting range: -20~20°C (-4~68° F)
• Cooling Mode: under the running state, press
(Energy saving Mode).(*Factory setting is MAX.)
• Battery Protection Mode: under the running state, long press
again to select protection mode H(High), M(Medium) and L(Low)
*Factory setting is H.
Voltage Reference:
INPUT
MODE
L
M
H
*The voltage is theoretical value, there may be a deviation in different sceneries.
*H should be set when the product is connected to car power, and M or L should be set when it is connected to a portable battery or other
back-up battery.
• Temperature Unit Setting: switch off the fridge, long press
pressing again, then press + or - to switch Celsius or Fahrenheit. *Factory setting is °C.
• Reset: switch off the fridge, long press
time for 3 seconds to reset it.
to switch ON/OFF.
DC 12V
CUT OUT
8.5V
10.1V
11.1V
for 3 seconds until displays E1, under E1 mode, long press + - to the same
to switch MAX(fast cooling) and ECO
for three seconds until screen flashes, then press
CUT IN
10.9V
11.4V
12.4V
for 3 seconds until displays E1, and switch to E5 by
DC 24V
CUT OUT
21.3V
22.3V
24.3V
CUT IN
22.7V
23.7V
25.7V
7