Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.- Connectivity
The alarms are equipped with a port for connection of RS485 (MODBUS) data, that allows it to remotely manage
them using an AKO-5012 webserver.
The MODBUS address is set at the factory and is indicated on the rating plate located on the left side of the alarm.
This address must be different for each unit within the same network. The address can be changed using the
AKONet software. Once modified, the old address indicated on the plate will not be valid.
AKO-5012
LAN
CAMRegis
Tr+
Tr-
Gnd
AKOControl*
Tr+
Tr-
Gnd
AKOControl*
Tr+
Tr-
Gnd
* AKO controller with communication
**AKO-80024 Use if connecting more than 25 units
AKO-80039
>25 **
AKOALARM
AKOCORE
Terminating resistors are not required.
16
AKO-80039
Tr-: Yellow
Tr+: Orange
GND: Black
AKOGAS
Tr+
Tr-
Gnd
Tr+
Tr-
SECURE
Gnd
Tr+
Tr-
CONTROL
Gnd
5532H301 Ed.02
RS-485
+
GND
Werbung
