Cleaning, Care And Storage; Technical Data - Ideen Welt P8-RM-ENS Bedienungsanleitung

CLEANING, CARE AND STORAGE

Attention! Never use alcohol, acetone, benzene or any
other aggressive cleaning agents to clean the plastic
components. Do not use hard brushes or metal
objects.
RISK OF INJURY! Always disconnect the mains plug
from the mains socket and allow the device to cool
down before carrying out any work on the device.
Regularly carry out the following maintenance and cleaning work. This will guarantee the long and
reliable functionality of the device.
1. Check the device for obvious defects such as loose, worn or damaged parts before using it each
time.
2. Make sure you have read the safety instructions before cleaning.
3. Ensure that the safety lock
it.
4. Use a slightly dampened cloth and, if necessary, a mild cleaning agent for cleaning the device.
5. The device must not be sprayed with water or placed in water.
6. Make sure that no water penetrates inside thedevice. Always rub the device dry after cleaning it.
7. Do not use sharp objects, benzene, solvents or cleaning agents that damage plastics under any
circumstances.
8. Keep the device and all its accessories in a location that is protected from dust, moisture and
direct sunlight. Store the device out of the reach of children.

TECHNICAL DATA

Model designation
EAN
Input voltage/current
Power consumption
Safety class
Compatibility:
Fine wire staples
Nails
Noise emissions
Vibration (a ) on handle
h
①
on the device has been activated before carrying out any work on
P8-RM-ENS
4305615578293
220-240 V ~ 50 Hz
45 W
II /
type 53
Width: 11.4 mm, external
Length: 6-14 mm
type 47
Max. length 15 mm
The noise emissions were measured in accordance with EN 60745.
The A - weighted noise level of the power tool is typically:
Sound pressure level: 73.82 dB(A)
Sound power level:
Uncertainty K:
Wear hearing protection!
4.678 m/s², K=1.5 m/s²
G
84.82 dB(A)
3 dB