GEM TempoCem Gebrauchsinformation Seite 17

2. Attach a new mixing tip [B].
Please note: Make sure that the notches on the
mixing tip line up with those on the Smartmix
injector [C].
9 0 °
3. Turn the mixing tip clockwise 90° to lock it.
4. The material is mixed in the cannula when it
is expressed and it can be applied directly.
Please note: When using an injector for the first
time, squeeze out a pea-sized amount of mate-
rial and discard it!
Leave the used mixing cannula on the Smartmix
injector after use. It serves as a cap!
Disinfection of the Automix dispenser
The Automix dispenser is reusable after disinfection,
although it should be replaced if visible signs of
wear appear.
Disinfection can be carried out using a commercially
available dipping disinfectant. DMG recommends
using only disinfecting solutions listed by the RKI
(Robert Koch Institute). The Automix dispenser
is also autoclavable.
17