Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick Start Guide
RF-TTLP4-01/HT300 Thermal Label Printer
Item no: 2734626
1 Intended use
The product is a thermal label printer.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the instructions carefully and store them in a safe place. Make this product available to
third parties only together with these instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Printer
■
Power adaptor
■
Mains cable
■
USB cable (USB-A to USB-B)
■
USB memory stick
3 Operating instructions
Download the latest operating instructions from
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
Read the operating instructions carefully.
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet.
The symbol warns of hot surfaces that can result in severe burns when touched.
Read the information carefully.
5 Safety instructions
Read the information in this document carefully and especially observe the
safety information. If you do not follow the safety instructions and informa-
tion on proper handling, we assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/guar-
antee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Installation
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Dust can damage the printer. Do not install the printer in dusty locations.
4
■
Ribbon core
■
Ribbon
■
Paper roll
■
Quick start guide
www.conrad.com/downloads
or scan the QR
■
Vibrations, shock and impacts can damage the printer to move and fall down. Install the
printer on a solid, stable and non-slip surface.
■
Liquids can damage the printer and cause short-circuits. Keep liquids away.
5.4 Operation
The hot printer head can cause burns. Do not touch the printer head.
■
Static discharge can damage the printer head. Do not touch the printer head.
■
The cutter blade is sharp and can cause cuts. Do not touch the blade.
■
Only use recommended label paper to prevent damage to the printer.
■
Switch off the printer before you make and disconnect connections.
■
Blocking moving parts can cause damage. Do not touch, block or pull moving parts dur-
ing operation. Do not stick objects into openings.
■
Only use approved accessories to prevent damage.
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.6 Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
■
Connect the appliance to a wall socket that can be accessed easily.
■
As power supply, only use the supplied mains adaptor.
■
Only connect the power adaptor to a normal mains socket connected to the public sup-
ply. Before plugging in the power adaptor, check whether the voltage stated on the
power adaptor complies with the voltage of your electricity supplier.
■
Never connect or disconnect power adaptors if your hands are wet.
■
Never unplug the power adaptor from the mains socket by pulling on the cable; always
use the grips on the plug.
■
For safety reasons, disconnect the power adaptor from the mains socket during storms.
■
Do not touch the power adapter if there are any signs of damage, as this may cause a
fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter (switch off the
corresponding circuit breaker or remove the safety fuse, and then switch off the cor-
responding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter
again.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.7 Repairs
■
Repairs require specialist knowledge. Contact a professional to have the printer repaired.
■
Only use original spare parts to repair the printer.
Werbung
