Atlantis URBAN PLUS Bedienungsanleitung Seite 5

Attention: The health parameters can only be measured when the smartwatch is properly
turned on. In case it is not correctly configured, the recorded data will not be accurate or
no data will be recorded at all.
Make/answer/reject calls
Before using these functions, make sure that all call permissions have been granted to the
App and that the incoming call and contact synchronization options have been activated.
Receiving calls
It is very important to have the incoming calls feature enabled in order to receive incoming
calls. Calls will appear in real time on the screen and the watch will vibrate.
Calls can be accepted or rejected from the watch by pressing the green and red button
respectively.
In case the call is accepted, it can be ended by pressing the red button. If the call is
rejected, a call notification will appear on the display of your smartwatch.
In case the incoming call function is not activated, the smartwatch will only display
notifications about incoming calls, but will not emit real-time signals or vibrate.
Making calls
There are three options available for making calls:
- Call a contact: the smartwatch can store a list of contacts previously chosen from the
App. To create the watch's contact list, open the APP and select "Top Contacts". Then
select the "+" sign to import the contacts from your phone's contact list. Once the list is
updated, access the call menu of your watch and select "Contacts" to start automatic
synchronization. Then select the contact you wish to call and the call will start
automatically. Press the red button to end the call.
- Call history: Access the call history under "Calls" on your URBAN PLUS, select a contact
and call them. Press the red button to end the call.
- Dialer: Dial the number you want to call from the "Dialpad" and press the green button to
start the call. Press the red button to end the call.
From the "Calls" function of the smartwatch you can also make SOS calls directly.
Voice assistants
There are several ways to activate the voice assistants:
• Press and hold any of the 3 buttons for 2 seconds and they will automatically activate.
• Through the split screen quick access menu, by clicking on the "Voice Assistants" button.
• Through the general menu, by clicking on the "Voice Assistants" button.