Seite 3
Vor allen Arbeiten am Gerät muss die Stromversorgung unterbrochen werden! Die Installation dieses Geräts handelt es sich um die Arbeiten an der Netzspannung. Deswegen müssen die Arbeiten gemäß den länderspezifischen Sicherheitsvorschriften und Anschlussbedingungen durchgeführt werden. Die Installation des Produkts muss von einem zertifizierten professionellen Elektriker durchgeführt werden.
Seite 15
REMOTE CONTROL OPERATION / ARBEITSWEISE VON FERNBEDIENUNG / MÉTHODE DE TÉLÉCOMMANDER / OPERACIÓN DE CONTROL REMOTO / FUNZIONAMENTO DEL TELECOMANDO 15 15...
Seite 19
Refer to the figure on the right to remove and replace the remote control battery. Note: 1.Used batteries/accumulators and lamps should be separated from the equipment. 2.Users should delete their personal data. 3.The battery type is button battery CR2025, and the battery composition is lithium . The battery cannot be treated as household waste and needs to be disposed of separately.
01 - Stellen Sie sicher, dass der Abstand zwischen dem Licht und dem beleuchteten Objekt mehr als 1 Meter ist, um hohe Temperaturen durch kurzen Abstand zu vermeiden. 02 - Schutzklasse II=Diese Lampe ist doppelt isoliert und darf nicht an einen Schutzleiter angeschlossen werden.
Seite 24
Step 1: According to the spacing (see the “A” part of the picture) of two screw bits on the LED Light bracket, drill two mounting holes. Step 2: Put the bracket onto the prepared mounting holes and then screw it on. Step 3: Adjust the beam direction as you like, and then plug into the main socket.
Seite 28
Manufacturer / Hersteller: Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang Dong, 518000, CN support@onforuled.com www.onforuleds.com EU REP MDH LIGHTING LTD Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus | support@onforuled.com UK REP MDH LIGHTING LTD 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom | support@onforuled.com Made in China...