Focal SPHEAR WIRELESS Gebrauchsanleitung Seite 11

SPHEAR WIRELESS
®
U s e r m a n u a l
11
Using the headphones
Turn on the headphones:
Press the on/off button to turn on your headphones. The blue light will flash. If it is the first time you are
using them, refer to the 'Pairing your headphones' section. If not, Sphear Wireless will connect to the last
device connected. If this is not turned on, it will connect to the one before that, and so on.
CAUTION:
• Your headphones must be turned on before activating the Bluetooth® feature on your Bluetooth® device
or you will have to manually reconnect.
• Sphear Wireless will turn off automatically after 5 minutes if there is no saved Bluetooth® device to connect to.
Changing the equaliser mode
Sphear Wireless have two equaliser modes: a natural mode, that stays faithful to the original work, and a
Loudness mode for listening in noisy settings or at low volume.
To change the EQ mode, simultaneously press the + and - buttons on the remote control for more than
three seconds. A sound signal will let you know the EQ mode has been changed.
On some devices, when you turn off the headphones, they will automatically return to the default settings
and to EQ natural mode. If this happens and you want to return to Loudness mode, you will have to
reactivate it each time you switch them on by simultaneously pressing the + and - buttons on the remote
control for more than 3 seconds.
Storage
Roll the In-Ears up on themselves and place them in the dedicated space inside the carrycase. The
thickness of the wires reduces the risk of tangling.
We recommend you clean your headphones regularly to avoid obstructing the output and thus reducing
the performance of your in-ear headphones.
Cleaning the tips
Be sure to remove the earbud tips from the in-ear headphones carefully to avoid damaging them. Then
clean them using a dry cloth for memory foam tips or a damp cloth for silicone tips.
Cleaning the duct and protective grille
After a while, the output of your headphones may become blocked by ear wax or other impurities (e.g.
dust, etc.). We therefore recommend you clean them regularly. To do this, remove the earbud tips from
the headphones, then using a soft cloth or cotton bud, lightly rub the grille located inside the duct. Then
replace the tips.
WARNING :
Focal reserves the right to cancel the guarantee if the cleaning procedure is not respected.