Focal SPHEAR WIRELESS Gebrauchsanleitung Seite 10

SPHEAR WIRELESS
U s e r m a n u a l
Please validate your Focal-JMlab warranty,
it is now possible to register your product online: www.focal.com/warranty
Package contents
• 1 Sphear Wireless in-ear headphones
• 3 pairs of silicone tips (sizes S/M/L)
• 3 pairs of memory foam tips (sizes S/M/L)
• 1 battery fastening clip for sports activities
• 1 carrying pouch
• 1 USB cable
Charging your headphones
Before using your headphones for the first time, charge the battery for 5 hours to achieve optimum
capacity and operating life. Only use the original USB charging cable to avoid any damage. Finish your
phone call before charging the headphones as they will turn off when you connect the charger.
To charge your headphones, connect the supplied USB cable to the micro-USB charging jack on the
battery pack to a computer's USB port or to a USB AC adapter. The indicator lights up in white during
charging and turns off when the headphones are fully charged.
It can take up to 2 hours to charge them fully.
Pairing your headphones with your Bluetooth® devices
Your Sphear Wireless headphones can save up to 4 Bluetooth® devices and can connect with 2 devices
at the same time.
Once your headphones are charged, hold down the on/off button until the light flashes blue and white.
The headphones will remain in 'pairing' mode for 5 minutes. Activate the Bluetooth® feature on your
Bluetooth® device then connect your Sphear Wireless headphones. For more details, refer to your
Bluetooth® device's manual.
CAUTION:
Some Bluetooth® versions require a password when you want to connect to Sphear Wireless. If this
happens, enter 0000 when prompted.
Our policy of continual product improvement means that Focal-JMlab reserves the right to modify the technical specifications
of its products without notice. Product may vary from images.
®
English 10