Pepperl+Fuchs I HH20 Serie Kurzanleitung Seite 37

HANDHELD I*-HH20*
Operation
If the read operation is successful, the status LED will initially flash yellow
before switching to a steady green. If you selected the buzzer and the vibration
alarm in the Settings menu, you will also hear an acoustic signal and the
handheld will vibrate. The read-in data will then be displayed in the selected
format. If the transmission failed, the status LED will flash briefly red and an
error message will be output.
Note!
All the data are displayed in the format (ASCII, HEX, DEC) that you chose in
the Data Format submenu.
EN
37