Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
DISPLAY RULES
1-Standby status:
• When the air fryer is connected to the power supply, the buzzer rings,
and the Power-Saving mode is on.
• To enter the Standby Mode, touch the switch button. All the indicator
lights are on, and the digital tube is displayed. If there is no operation, the
air fryer returns to the Power-Saving mode in 2 minutes.
2-Function selection:
• Touch the function button in Standby Mode, all the corresponding
function button lights are on.
• Select the function, and touch the Start/Pause button to start working.
3-Working status of each function:
• When selecting the function, the numbers show up on the display for
time and temperature.
• After the end of the function, the air fryer switches to Power-Saving
mode after 30 seconds. Or transfers to Power-Saving mode after
picking up the pan within 30 seconds.
• The electric heat pipe and fan don't work after taking the pan in any
state.
• When you touch the Inner Lamp button, the inner lamp will be on for
30 seconds.
• Touch the Pause button, the time stops counting.
• Maximum time on the display is 60 minutes.
• When the air fryer is working, you can't switch other menus.
4-Wifi setting status:
• Touch the function button on Standby for 3 seconds, and the WiFi
indicator light starts to turn on, and the WiFi indicator light will keep on
after successful configuration.
• When it shuts off, the WIFI indicator light turns off.
5-Flip tips:
• Only the function of French Fries has a tip to turn over.
• When the time runs to 2/3 of the during the frying, it prompts to shake,
and the buzzer rings 5 times.
• After the pan is put back, the digital screen will continue to display the
temperature time and continue to work.
ARZUM
19
Werbung
