TQ STKT104X Kurzanleitung

STKT104X Quick-Start Guide
Connect Host PC and STKT104X
A
Use the supplied null modem cable to connect COM1 of the STKT104X (X35)
to a serial port on your host PC (e.g. COM1 / ttyS0).
Run terminal emulator and configure serial port
Run your favourite terminal emulator on the host PC (we recommend
configure the serial port as follows :
Baudrate
115200
Supply the STKT104X with power
B
Double-check the mains voltage required for the included power supply,
then connect it to connector X33 on the STKT104X.
Establish Serial Connection
U-Boot: The boot messages of U-Boot will show up in the terminal emulator.
For latest documentation, BSPs and supplemental tools please visit
Data bits
8
B
Parity Stop bits
none
www.tq-group.com/en/TQMT1042
Tera Term Pro
) and
Handshake
1 XON/XOFF
A