TQ STKT2081 Kurzanleitung

STKT2081 Quick-Start Guide
Connect Host PC and STKT2081
A
Use the supplied null modem cable to connect COM1 of the STKT2081 (X35)
to a serial port on your host PC (e.g. COM1 / ttyS0).
Run terminal emulator and configure serial port
Run your favourite terminal emulator on the host PC (we recommend
configure the serial port as follows :
Baudrate
115200
Supply the STKT2081 with power
B
Double-check the mains voltage required for the included power supply,
then connect it to connector X33 on the STKT2081.
Establish Serial Connection
U-Boot: The boot messages of U-Boot will show up in the terminal emulator.
For latest documentation, BSPs and supplemental tools please visit
Data bits
8
B
Parity Stop bits
none
www.tq-group.com/en/TQMT2081
Tera Term Pro
) and
Handshake
1 XON/XOFF
A