Ergon BA3 Evo Bedienungsanleitung Seite 11

ERGON BIKE ERGONOMICS
Adjusting the back length
1.
Lift the pads outwards to the sides as illustrated above, pull
the shoulder plate upwards slightly and release the strap
underneath.
3.
Note: When a back length is selected the strap covers the
selected length's marking.
5.
While replacing the pads to their original position, it is possible
to bend the shoulder plate slightly to allow the backpack to be
formed to suit the user.
Chosen back
length "M" hidden.
Ensure that you have
fastened the poppers
fully.
2.
Pull the strap through the shoulder plate, and then thread it
through a different hole to pick the desired back length.
4.
Please ensure when threading the strap that the shoulder plate
is threaded to the limit of the strap.
6.
By lightly bending an internal aluminium strip the user can
adjust the horizontal fit (aluminium strip is located between the
upper and lower pads).
( EN )