ARDES AR4H05 Bedienungsanleitung Seite 10

Warnings
Keep handy the guarantee, receipt of payment and these instructions for
future use and reference.
After removing the packaging, check the appliance for any signs of
damage. In case of visible damage, do not use it and contact a qualified
technician.
Keep all parts of the packaging out of the reach of children.This appliance
is not a children's toy: it is an electrical device and must be treated with
the necessary caution.
Before connecting the appliance, make sure that the power supply
voltage matches the indication on the data plate.
If the plug and socket are not compatible, replace the socket with a
suitable type, applying to skilled people.
Do not use adapters or extension cables which do not meet current
safety standards or that exceed the current carrying capacity limits.
When you don't use the appliance disconnect it from the power supply.
Do not tug on the power cable or the appliance itself to remove the plug
from the socket.
The use of any electrical appliance requires that a number of basic rules
are observed, namely:
- Never touch the appliance with wet or humid hands.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
The power cable should be extended to its full lenght to avoid over
heating.
In the event of a breakdown, operating anomaly, tripped fuse or tripped
protective thermal fuse, unplug the appliance immediately and contact an
authorized service centre; do not attempt to repair the appliance yourself.
For the sake of safety, never open the pad or the control: there are no
parts inside that require servicing.
Do not place the control unit near sources of heat. Do not cover the
control unit or place it on top of the appliance while it is in use.
The device must not be subjected to the weight of the body.
Do not use the appliance out of doors.
Do not use together with another heating appliance.
Instructions for use
Place the plug in the current socket.
Turn on the appliance by pressing the ON-OFF key and keeping it pressed for a few
seconds. The device will turn on automatically in position 3.
To change the heating position, press the TEMP key repeatedly until you reach the
desired level, which can be set from 1 to 6.
Please set preheating at the highest tap "6" position 10 minutes before using, then
10