Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Device Usage (Mac Environment)
Once the DTL+ G3 has been initialized, you
can access the secure data partition and utilize
the device options by logging into the device
with your password. To do so, follow these
steps:
1. Insert the DTL+ G3 into a USB port.
2. Double-click the DTL+ G3 volume icon
3. Open the Mac folder and double-click the
DTLplus_Launcher app.
4. Enter your password in the Login window
textbox (see
Figure 8.1
5. Once you've typed your password, click the
'Login' button to continue.
If the correct password is entered, the
•
DTL+ G3 will unlock and you can begin
using the device.
If an incorrect password is entered, an
•
error message will appear just below the
'Hint' field, indicating a login failure (see
Figure 8.2.)
During the login process, if a bad password is
entered, you will be given another opportunity
to enter the correct password; however, there
is a built-in security feature that tracks the
number of failed login attempts*. If this number
reaches the pre-configured value of 10 failed
attempts, the DTL+ G3 will lock and require a
device format of the secure data partition prior
to next use.
THIS MEANS THAT ALL DATA STORED
ON THE DTL+ G3 WILL BE LOST.
For more details on this feature, see
'Device Lockout' on page 22.
*Note: Once you authenticate to the device successfully, the failed login counter will reset.
Document No. 480G3001-001.A04
.)
®
DataTraveler
Locker+ G3 USB-to-Cloud
Figure 8.1 – Login Window
Figure 8.2 – Login Failure
Page 19 of 24
Werbung
