HP Vaerktoj 75045 Gebrauchsanweisung Seite 25

INSTRUCTION MANUAL
Thickness planing
Slacken width adjustment knob (5) on blade
guard (4), and push clear of blade housing (10).
Fit extractor to back table using handle (a).
Fit adapter on nozzle and connect to extractor
system.
ENGLISH
Preparing plane
Set side guide at desired angle (90-135°) using
adjustment screw (b) if guide is to be used.
Insert plug in mains socket.
Use
Planing:
Turn adjustment knob (9) to lower front table to
desired height. Planing depth can be seen on
indicator (c).
Place item on front table and set blade guard to
required height using arm adjustment knob (15).
25