Nowsonic Stage Extender Bedienungsanleitung Seite 7

Stage Extender
EN
User manual
Description of the top panel
The Nowsonic Stage Extender has the following controls and indica-
tors on the top panel:
5G WPS button
■
If you press the 5G WPS button briefly, the Stage Extender will
automatically establish a secure connection with all currently con-
nected devices on the 5 GHz radio frequency (802.11n mode).
2.4G WPS button
■
If you press the 2.4G WPS button briefly, the Stage Extender will
automatically establish a secure connection with all currently con-
nected devices on the 2.4 GHz radio frequency (802.11g mode).
NOTE: The 2.4G and 5G connection modes can be activated in par-
allel. If you also want to set up radio microphone lines, you should
use the Stage Extender exclusively in the 5 GHz (802.11n) frequency
band. Transmitting on the 2.4 GHz radio frequency (802.11g mode)
can cause transmission problems (even in true diversity mode).
CPU indicator
■
When the Stage Extender is switched on, this LED will flash blue. If
you have reset the Stage Extender using the RST button, the CPU
LED will temporarily flash faster.
5G EXT indicator
■
When the 5 GHz band is being used for radio transmission, this LED will light.
2.4G EXT indicator
■
When the 2.4 GHz band is being used for radio transmission, this LED will light.
Nowsonic_StageExtender.indb 7
5G EXT
2.4G EXT
LINK/ACT
7
www.nowsonic.com
08.03.17 16:20