Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. The speaker is in pairing mode, blue LED (5) flashes.
4. Turn on Bluetooth mode on the device which is about to
be connected (e.g. smart phone). and pick „BAS 4" from
the list of devices available. For further information see
the device's user manual if necessary.
5. Make sure that the distance between speaker and
devices doesn't exceed 10 metres in order to avoid
connection problems.
6. Enter password „0000" if necessary.
7. When sucessfully paired, the blue indicator LED (5) is
constantly shining blue.
8. Now you can play back music from the external device.
Play back can be either controlled via the external device
or via BAS 4 (forward/rewind, play/pause, volume
control). If a smart phone is connected via Bluetooth, the
BAS 4 may also be used as hands-free device.
9. If switched on again, the speaker will reconnect to the
last device paired to before switching it off.
10. In order to reset the Bluetooth connection, press and
hold button 1 for about 8 seconds. The Bluetooth
connection is terminated and the speaker will go back
to pairing mode.
TF card operation
1. Fully charge the speaker's battery.
2. Insert a TF card into the BAS 4's card slot (7)
3. Press button 1 to switch on speaker and short press 1
to switch to TF mode („TF mode" is said).
4. Play back music from the inserted TF card by using the
BAS 4`s control buttons.
FM radio mode
1. Fully charge the speaker's battery.
2. Press button 1 to switch on speaker and short press 1
to switch to FM radio mode („FM mode" is said).
E
Werbung
