Chicago Pneumatic HR8108 Bedienungsanleitung Seite 3

EN
Technical Data
1.
Max. working air pressure
Ambient temperature
Declare that the product(s)
2.
This product is designed for supplying air.
No other use permitted. For professional use only.
Mounting instruction
3.
• Maximum installation height above floor level is 4 m. Choose a way of mounting to avoid excessive bending of
the hose against the outlet. Select a level surface on which to mount the reel. Ensure that suitable fixing bolts
are used and that they are secure. The bolts must each stand a torque force of minimum 900 N. When choosing
mounting place it should be notified that the lifetime of the hose reel can be reduced by the influence of chemi-
cals and strong UV or heat radiation.
Connection to the pipework system
4.
The reel must be connected to the pipework system with inlet hose only, minimum 1,0 m. Secure the hose on
the support of the reel with cable ties (not supplied). Check that the hose is not twisted or strained after connec-
tion. A stop valve should be fitted on the pipe system before the hose connection.
5. Maintenance instruction
WARNING:
Risk of personal injury! Before starting any operation in the reel:
- Turn off the supply of air.
- Release the pressure.
Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact
the manufacturer or your nearest authorised dealer for advice on technical service or if you require spare parts.
Inspection regarding hose, ratchet mechanism and mounting on wall or ceiling should be accomplished at least
once a year .
6. Declaration of conformity
We : : CHICAGO PNEUMATIC Tool Co. 1800 Overview Drive Rock Hill, SC 29730 - USA
Declare that the product(s): Hose reel
Model: HR8108 HR8110 HR8208 HR8210 HR8113 HR9110 HR9113 HR9213
Machine type(s): From 00001 to 99999
Origin of the product : Italy (HR8208, HR8210, HR8113, HR9110, HR9113, HR9213) / China (HR8108,
HR8110)
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member
States relating : to "Machinery" 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : : EN ISO 12100:2010
Name and position of issuer : Nicolas LEBRETON (R&D Manager)
Place & Date: Saint Herblain 25/06/2015
Technical file available from EU headquarter. Chicago Pneumatic Tool Co
- France
Copyright 2015, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part
numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
: ................................. : 15 bar
: ................................. : -10 - +60 °C
.
LLC CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain